-Setup of the production equipment and be responsible for achieving output target as well as the products meet all company and customer requirements
安裝生產設備并負責實現產量目標, 以及產品滿足所有的公司和客戶的要求
-Must make sure that the related process step follows strictly the standard parameter, SOP and SIP
必須確保 SOP 和 SIP 相關的處理步驟根據嚴格的標準參數
-Monitor the production incl. parameter adjustment when necessary, deal with quality failures (appearance and dimension) and machine alarms
監控生產及參數調整, 必要時,應對質量故障 (外觀和尺寸) 和機器警報
-Fill out the related production daily reports with correct data at the end of shift and submit it immediately to Shift leader
在班次的最后填寫相關的生產日?qǐng)?bào)表和正確的數據并立即向領班提交
-Be able to setup production for equipment and tool, can deal with common defects. Inform technician and supervisor in time, if defect cannot be solved by him/herself
能夠安裝生產設備和工具, 可以處理常見的缺陷, 如果不能自己解決及時通知技術員和主管
-Regularly check the compliance with EHS procedures and regulations including proper use of industrial safety equipment
定期檢查符合 EHS 的程序和法規, 包括工業安全設備的正確使用
-Participate the CIP workshop concerning related operation and process to reduce the down time, cycle time and enhance the process stability and production efficiency
參與 CIP 車間相關的操作和流程, 減少停機時間, 周期時間和提高穩定性和生產效率
-Can be transferred to other tasks/departments if training for temporary job has been done in advance and must be able to take over operator jobs temporarily (e.g. short of manpower)
如果完成培訓并提前完成工作可以轉崗, 必須能夠暫時接管作業員的工作
-Participate in daily 5S philosophy and need to keep their work area clean and in order
參與日常 5S 理念和需要保持他們工作區域的整潔和秩序
-Perform daily maintenance of the equipment and keep them in good working status
執行日常維護的設備并保持良好的工作狀態
?
Authority 職權
-Authorized to refuse to start working if SOP is missing and/or training for the related product/process steps have not been completed
如果 SOP 丟失或培訓相關產品的步驟還沒有完成有權拒絕工作
-Authorized to point out improvement potential for related equipment and/or process
有權指出并改進潛在的相關設備和過程
Qualification Requirements 任職資格
-College or university graduate, preferably Engineering major
大專或大學畢業, 最好是工程專業
-More than 3 years working experience in injection molding, spray painting, laser etching or pad printing field
在注塑, 噴漆, 鐳射或移印有 3 年以上工作經驗
-Familiar with the following machine/equipment brands: Demag, Arburg, Engel, Wittmann (Injection technician), FOBA and HG (Laser technician), GRACO (Painting/printing technician
熟悉一下機器設備品牌: Demag, Arburg, Engel, Wittmann (注塑技術員), FOBA and HG (鐳射技術員), GRACO (噴漆 / 移印技術員)
-Ability to read and understand drawings, technical documents, specification sheets etc.
能夠閱讀和理解圖紙, 技術文件, 說明書等
-Strong sense of responsibility regarding company as well as customer
對公司和客戶有很強的責任感
-Basic oral English communication skills
基本英語的口語溝通能力
-Mature personality, positive thinking, good teamworking skills
品性成熟, 思維積極, 有良好的團隊合作精神
-High flexibility and hard working attitude
高度靈活和努力工作的態度
-Willingness to work in shifts and do overtime if necessary
如有必要可接受加班